Kanpur Plastipack Ltd. | Learning Hub | Fibc Handling Guidelines

Follow the handling instructions printed on the Safety label of FIBC.
Ensure FIBC is compatible and produced as per the filling product. (Whether Edible/ Non- edible or hazardous, etc.).
All applicable regulations and safety requirements should be followed.
Always consult your manufacturer/supplier regarding Technical Details before buying.
Protect the FIBCs from rain and prolonged sunlight, harmful UV rays, and inclement weather.
Do dispose of FIBCs by ecological requirements.

Ensure the Discharge Spout is correctly closed before filling FIBC.
The filling Spout / Duffle of FIBC should be closed as per the FIBC manufacturer's instruction.
Never go over the SWL (Safe Working Load) limits set for a specific FIBC.
The environment should be favorable for filling and emptying FIBC. For instance, electrostatic issues in explosive or flammable situations.
Ensure that the filled FIBC is stable.
Take appropriate measures regarding dust control.
Never allow anyone nearby to stand beneath an FIBC that is hung.
Never suspend/ discharge FIBC using single or fewer lift loops, sleeves, etc.

The lift truck needs to be sturdy and big enough to hold the filled FIBC.
When moving a filled FIBC, the driver must have a clear line of sight.
The angle of the mast should be aligned/ titled appropriately.
Make sure the forklift tines' edges are softened or covered.
Utilize hoisting equipment that can support the hung load.
The forklift tines must be adjusted to the correct width to prevent damaging lateral forces.
A forklift must be stopped prior to raising or lowering the FIBC.
Never subject an FIBC to sudden lifts/stops.

Liners should be pre-Inflated before filling for better results.
When filling or emptying, extend open liners away from the discharge spout.
Liners must be attached to FIBC properly so they do not come out/lose hold during the discharge procedure.
Tie off liners with spouts as instructed by the manufacturer.

FIBC storage and transportation pallets must be certified.
No protrusions or nails should be present on the pallets.
Pallets should be of appropriate size and FIBC bags should not exceed out of it.
Never take out or fix a bag that is broken without first taking out all bags placed on top.
Bags must be placed up against two strong, sturdy walls.
It is suitable to store filled bags in a pyramidal configuration.
Water and moisture must not be present in the storage facility or warehouse.

FIBC Handling Guidelines